safety operating procedures for gantry machining center-9001cc金沙

&nbsp& nbsp& nbsp& nbsp; the gantry machining center is an important equipment on the mechanical processing production line, which has a large cutting force and accuracy. therefore, it is necessary to strictly follow safety regulations during operation. the following text will focus on the differences in safety operating procedures for gantry machining centers, and provide a detailed introduction to the safety operating procedures for this equipment< br/>


&nbsp& nbsp& nbsp& nbsp; 1、 safety operating procedures for gantry machining center



&nbsp& nbsp& nbsp& nbsp; 1. wear protective equipment



&nbsp& nbsp& nbsp& nbsp; before using the gantry machining center, it is necessary to wear corresponding protective equipment, including safety shoes, safety glasses, earplugs, gloves, etc. no one is allowed to approach the equipment without wearing protective equipment properly< br/>


&nbsp& nbsp& nbsp& nbsp; 2. the operation must be familiar with



&nbsp& nbsp& nbsp& nbsp; before carrying out any operation, it is necessary to be familiar with and understand the entire operation process and hazardous areas of the equipment. for unfamiliar operators, relevant training and guidance should be provided, and experienced operators should provide guidance or supervision< br/>


&nbsp& nbsp& nbsp& nbsp; 3. keep clean



&nbsp& nbsp& nbsp& nbsp; it is necessary to regularly clean and maintain the equipment to ensure that it is in good working condition. at the same time, flammable, explosive, corrosive materials are not allowed to be placed near the equipment, and smoking is prohibited< br/>


&nbsp& nbsp& nbsp& nbsp; 4. check before starting the device



&nbsp& nbsp& nbsp& nbsp; before starting the equipment, it is necessary to check whether all parts of the equipment are securely installed, whether mechanical parts are normal, and whether the oil is sufficient. it is prohibited to start the device without inspection< br/>


&nbsp& nbsp& nbsp& nbsp; 5. do not place hands in hazardous areas



&nbsp& nbsp& nbsp& nbsp; during the operation of the equipment, it is strictly prohibited to place hands, heads, bodies, etc. in hazardous areas, such as fixtures, workbenches, cutting tools, etc., to avoid dangerous accidents< br/>


&nbsp& nbsp& nbsp& nbsp; 6. precautions before shutdown



&nbsp& nbsp&